Solution antibacterial anti-mildew Biovit 12

Solution antibacterial anti-mildew Biovit 12

Antibacterial solution for washing prior to water indoor wall surfaces contaminated with mold and condensation caused by various microorganisms.

Application: Brush - low-pressure spray.
- Thinner: Water.
- Dilution: ready to use.
- Drying time: touch dry 1 / 2 hours. Deep 4 / 5 hours.
- Theoretical: 8 / 10 sqm / lt per coat.
- Color: Transparent
- Packaging: 1 Litre
- General:

Antibacterial concentrated aqueous solution for washing the preliminary internal wall surfaces contaminated by
various microorganisms and mold, caused by condensation. Harmless to humans and pets.
- Use:

For washing and the cleaning indoor wall surfaces contaminated by mold.
- Application cycle:
Apply directly to mold the product as supplied. After completely dry, remove the mold with
scraper and stiff bristle brush. Repeat the application of 12 Biovit surfaces cleaned and allow to dry.

Run the set up of the normal cycle of mold and finish with no problem, washable interior to Action
anti-mold, anti-condensation.
- Technical:
- Specific weight average 1000 ± 10 g / liter at 20 ° C
- Brookfield RVT viscosity average = 1000 cps at 20 ° C
Wet abrasion resistance
- Aspect of the movie
Drying time at 20 ° C 1 - 2 hours to touch. Complete 4 - 5 hours
- Application temperature not below +5 ° C up to +35 ° C
- Theoretical yield 8 to 10 sqm / lt per coat
- Thinner Water
- Dilution Ready
- Brush Tool - low-pressure spray
- Clean water equipment
- Pot life .........
- Storage Keep from freezing. Store in a cool, dry place, out of reach of children
- Shelf Life 12 months or so
- Hazard class Irritating
- Precautions For spray applications, use suitable
- Respiratory protection
- Color: Colorless